Nio will take roughly one to two years to switch its Nio and Onvo brands to shared large cylindrical cells that can be made on the same production lines, Founder and CEO William Li told owners in Changzhou on Saturday.
Using high-nickel chemistry in those cells would lift Nio’s 102 kWh pack to 120 kWh and Onvo’s 85 kWh pack to 100 kWh, Li said, a gain of about 18% that he rounded to 20%.
Li also said the battery industry should standardize cells and go all out on large cylindrical cells, the format Nio used for the 46105 cell it unveiled nearly three years ago and has yet to use in a production car.
Founder and Chief Executive Officer William Li started Shanghai-based Nio in November 2014 with President Lihong Qin, the company’s co-founder.
Shared Cylindrical Cells
“The industry should push cell standardization and go all out on big cylindrical cells,” Li said.
“Big cylindrical cells bring one benefit. If I use mid-nickel inside, that’s our current 102 and 85,” he said, referring to the 102 kWh pack in Nio-brand cars and Onvo’s 85 kWh pack. “If I use high-nickel, that’s 120 kWh and 100 kWh. That’s a 20% gain, simple as that.”
“All cell and pack production lines can be reused, so efficiency is much higher,” Li said. “If we use big cylindrical cells, the cell and pack lines for Nio and Onvo batteries can all be reused, with no need to switch lines. It’s very simple.”
The same equipment can make both mid-nickel and high-nickel cells, with only the materials inside changing, he said.
“I can say a bit more today. But this direction isn’t something we can switch to overnight,” Li said. “We’ll take roughly one to two years to complete the line switch.”
He Lei, CEO of automotive media company ‘Xinchuxing’, wrote in a summary of the session that Li meant a shift from mid- to high-nickel, from today’s 85 kWh to 102 kWh packs to 120 kWh to 150 kWh.
More on Nio
- Nio’s Sub-Brand Onvo Spotted Testing New SUV in ChinaNovember 20
- Nio’s Onvo Lowers Credit Bar to Offer 1,000 Last-Year L90s by SubscriptionNovember 17
- Onvo Deliveries Fall for Fifth Straight Month as Nio Sub-Brand StrugglesNovember 1
- Nio Set to Deliver 160,000th ES8 as Ex-NBA Player Takes OneOctober 19
High-nickel NCM cells store more energy than mid-nickel ones of the same size, which is how a pack of the same dimensions can hold more.
Sticking With NCM
Earlier in the same answer, Li said Nio would stay with nickel-based NCM cells rather than lithium iron phosphate (LFP) for its larger packs, mainly because they are lighter
“Onvo’s 85 is NCM and Nio’s 102 is NCM, so we will firmly take the NCM route,” he said. “At 60 kWh, LFP is enough. For the same 100 kWh, we would definitely use NCM, definitely not LFP,” because LFP packs of that size are heavier.
“Within NCM, our 102 and 85 are both still mid-nickel,” Li said.
Li said the EV maker had kept developing the large cylindrical cell it unveiled a few years ago and hoped to bring it to mass production. Nio is also encouraging its battery partners to adopt large cylindrical cells, he said.
Li added that Nio is pushing industry partners to make 46-series large cylindrical cells to speed up their adoption, which would only benefit the industry.
“Earlier this year I gave a speech at a forum saying the industry should push cell standardization, but I didn’t elaborate then,” he said. At an industry forum in Beijing in April, Li called for cell standardization and chip unification, saying they could save the industry more than 100 billion yuan ($15.0 billion).
Cells, Not Swappable Packs
Li’s remarks concerned the cells inside the packs. He did not say Nio and Onvo cars would be able to swap each other’s packs, which differ in size.
At the Nanjing session on Sunday, Li said some other carmakers’ brands will start using Onvo’s standard swap pack next year. He also argued that swapping lets carmakers fit smaller batteries, saying an LFP pack of well over 100 kWh weighs 700 to 800 kilograms.
A Cell Three Years in the Making
Nio unveiled its own 46105 large cylindrical cell, 46 millimeters in diameter and 105 millimeters tall, at NIO Day in December 2023, alongside the ET9 flagship sedan and a 900-volt-class architecture. The cell is taller than Tesla’s 4680.
At the time, Nio claimed an energy density of 292 Wh/kg at cell level.
The cells were meant to power a 120 kWh pack. When the ET9 went on sale in December 2024, it came with a 100 kWh pack instead, listed as 102 kWh in regulatory filings.
The 120 kWh option resurfaced at the third-generation ES8’s launch in September 2025. The ES8 and the ES9 flagship SUV remain capped at a 102 kWh pack from CATL.
A very small batch of 46105 cells is due to come off the line by the end of this year, with production contracted to EVE Energy and Gotion High-Tech, the Chinese battery outlet Jipian Lab reported in October.
Mass production is unlikely in the short term, an unnamed person told the outlet. Nio has not commented on that report.
EVE Energy supplies large cylindrical cells to BMW for its Neue Klasse electric vehicles. Gotion High-Tech is based in Hefei, where Nio has its China headquarters and builds its cars.
The cells may also matter beyond Nio’s own cars. In June 2025, Chinese outlet Yiou Auto reported that Nio would develop and supply battery packs based on its in-house large cylindrical cells to McLaren for its hybrid models, with small-batch production expected in 2026. Both companies are backed by Abu Dhabi’s CYVN Holdings.
Li recommitted to the 120 kWh pack at a user event in Quanzhou in August. “There will be a 120-kWh battery, and of course all cars can use it,” he said then, adding that it would fit Nio’s standard swappable pack dimensions.
In September, he said the pack would not be compatible with Nio’s 400-volt cars and would take more time. He has given no launch timeline.
In July, Li said Nio had invested several billion yuan in developing long-life batteries, according to 21st Century Business Herald.
The Changzhou remarks add a timeframe for the switch and a 100 kWh figure for Onvo’s pack.
A Record of Delays
Nio has a history of long gaps between battery announcements and delivery. Its 150 kWh semi-solid-state pack, announced in January 2021, did not reach customers until 2024, and then only for rent.
Its semi-solid-state cells came from supplier WeLion New Energy.
Nio made battery development a standalone department in 2020 and began designing its own cells in 2021. It later put plans to make cells itself on hold, in favor of designing them in-house and contracting production, according to Chinese media.
All of Nio’s current packs use cells bought from suppliers, mainly CATL. Firefly launched a 60 kWh pack in October that uses CATL ternary cells, according to Chinese media. The Onvo L60 offers 60 kWh and 85 kWh packs.
The Onvo L80 uses an 85 kWh pack, and Firefly’s standard pack is 42.1 kWh. Nio’s swap network had 4,236 stations in China on November 3, though only its newest, fifth-generation stations can take packs from all three brands.
Nio will report third-quarter results on December 1, before U.S. markets open.






